Catalytic Gas Detection – MultiXplo

 

simtronics2
The MultiXplo DM-TX6 intelligent catalytic sensor based flammable gas detector used to detect a wide range of gases, including Hydrogen (H2). The device has been designed for ease of installation, operation and maintenance in testing environments.

  • OXYCOL (TM) Catalytic Sensor
    The measurement process is based on OXYCOL (TM) low temperature catalytic oxidation, improving detection flammable gases and gives the detector an extremely long lifetime. This technology also improves the resistance to catalytic poisons.
  • Simplicity
    The interchangeable and removable cartridges simplifies maintenance.
  • Remote Control
    All controls, configurations and readouts are remotely accessible from the infrared remote controller.
  • An Autonomous Detector
    The digital processing linearises the measurement signal before transmitting it to a gas detection unit or plant automatic control system. Detectors have both analog and contact outputs.

The large detection spectrum enables the use of the oxidations catalytic sensor in a large scope of applications such as: Storage of flammable materials, petrochemicals, LNG/LPG, automobile industry, chemicals, pharmaceuticals, aerosols, etc. The low cost of catalytic oxidation sensors in semi-industrial applications such as: Battery loading premises, boiler rooms, pharmaceutical laboratories, etc.

Technical Details
Technology Low temperature oxidation process, Oxycol™
Detects Flammable gases
Range 0 – 100% LEL
Calibration With calibration gas
Performance
Response Time T90 < 10 s (Methane)
Zero Drift ±3% full scale deflection
Accuracy ±5% full scale deflection
Repeatability ±1% full scale deflection
Sensor Life Better than 5 years
MTBF 73,000 hours
Output Signal
Standard 4 - 20mA, max load impedance 7000Ω (Std.)
(600Ω with optional LCD display)
2 x configurable relays max. 1A / 30V
Option 0 – 20mA (Option for PLC’s)
Lonworks [Syntel]
Electrical
Power Supply 24 VDC, range (18 – 32VDC)
Power Consumption 55mA normal
Connection 0.3 mm² ( 22 AWG) – 1.5mm² (12 AWG)
Shielded cable recommended
Environmental
Storage -40°C to +70°C
Operation -20°C to +60°C
Humidity 0 to 95% RH (Non-condensing)
Pressure Atmosphere pressure ±10%
Ingress IP66
RFI/EMI Complies with EN50081-1, EN50081-2, EN50082-1 and EN50082-2
Housing
Material Epoxy coated aluminum (standard)
316 L stainless steel (option)
Weight 1.8 kg (4lbs) Aluminum
6.5 kg (14.3lbs) Stainless steel
Approvals
ATEX ATEX II 2 G Ex d II C T6
Temperature Range -20°C to +60°C
Certificate Number LCIE03ATEX6263
Note: Specifications are subject to change without notice.




Share On Facebook
Share On Twitter
Share On Linkedin
Whatsapp
We Chat
Contact us

More Products / Systems