Catalytic Gas Detection - MultiXplo
The MultiXplo DM-TX6 intelligent catalytic sensor based flammable gas detector used to detect a wide range of gases, including Hydrogen (H2). The device has been designed for ease of installation, operation and maintenance in testing environments.
- OXYCOL (TM) Catalytic Sensor
The measurement process is based on OXYCOL (TM) low temperature catalytic oxidation, improving detection flammable gases and gives the detector an extremely long lifetime. This technology also improves the resistance to catalytic poisons. - Simplicity
The interchangeable and removable cartridges simplifies maintenance. - Remote Control
All controls, configurations and readouts are remotely accessible from the infrared remote controller. - An Autonomous Detector
The digital processing linearises the measurement signal before transmitting it to a gas detection unit or plant automatic control system. Detectors have both analog and contact outputs.
The large detection spectrum enables the use of the oxidations catalytic sensor in a large scope of applications such as: Storage of flammable materials, petrochemicals, LNG/LPG, automobile industry, chemicals, pharmaceuticals, aerosols, etc. The low cost of catalytic oxidation sensors in semi-industrial applications such as: Battery loading premises, boiler rooms, pharmaceutical laboratories, etc.
| Technical Details | |
| Technology | Low temperature oxidation process, Oxycol™ |
| Detects | Flammable gases |
| Range | 0 – 100% LEL |
| Calibration | With calibration gas |
| Performance | |
| Response Time | T90 < 10 s (Methane) |
| Zero Drift | ±3% full scale deflection |
| Accuracy | ±5% full scale deflection |
| Repeatability | ±1% full scale deflection |
| Sensor Life | Better than 5 years |
| MTBF | 73,000 hours |
| Output Signal | |
| Standard | 4 - 20mA, max load impedance 7000Ω (Std.) (600Ω with optional LCD display) 2 x configurable relays max. 1A / 30V |
| Option | 0 – 20mA (Option for PLC’s) Lonworks [Syntel] |
| Electrical | |
| Power Supply | 24 VDC, range (18 – 32VDC) |
| Power Consumption | 55mA normal |
| Connection | 0.3 mm² ( 22 AWG) – 1.5mm² (12 AWG) Shielded cable recommended |
| Environmental | |
| Storage | -40°C to +70°C |
| Operation | -20°C to +60°C |
| Humidity | 0 to 95% RH (Non-condensing) |
| Pressure | Atmosphere pressure ±10% |
| Ingress | IP66 |
| RFI/EMI | Complies with EN50081-1, EN50081-2, EN50082-1 and EN50082-2 |
| Housing | |
| Material | Epoxy coated aluminum (standard) 316 L stainless steel (option) |
| Weight | 1.8 kg (4lbs) Aluminum 6.5 kg (14.3lbs) Stainless steel |
| Approvals | |
| ATEX | ATEX II 2 G Ex d II C T6 |
| Temperature Range | -20°C to +60°C |
| Certificate Number | LCIE03ATEX6263 |
| Note: Specifications are subject to change without notice. | |
| Download Catalog | |
| DM-TX6 |  |
 |
For all inquiries, you may contact us through Telephone, Email or Live Chat Support.
Operating Hours
Monday to Friday: 8.00am to 5.30pm
Technical Support (After Office Hour)
Tel: (65) 9876 6258
Contact Informations
| By Phone / Fax | By Email | By Live Chat | |
| Tel: (65) 6553 0366 Fax: (65) 6553 0828 |
This e-mail address is being protected from spambots. You need JavaScript enabled to view it |
|
|
|||||||||||||||||||||||||||
