Multisensor Fire Detector - OTblue

OTblue should be used to protect objects where it is able to detect open fires, early smouldering fires and fires with high heat generation and such objects may be:

• High Voltage switch gear which has high energy potential and may possibly cause flaming fire. 
Such fires will initially produce a large amount of invisible smoke particles that are too small to
be detected by an IR based optical detector.

• Entrances areas, garbage containers, psychiatric wards, prisons etc.

• To prevent arson where fire will almost always start with an open fire.

In a practical sense OTblue detector has many of the detection abilities of an Ion detector. With the innovative optical technology, the OTblue detector will replace the use of Ion detector.

• Flat aesthetic design

• Centred 360 deg. alarm

• Separate on-indicator (green LED)

• Detection of a wider smoke spectrum than any other optical IR based detector

• Detecting the smaller particles previously only seen by ionisation detectors

• Processor - controlled decentralize signalprocessing

• Low operation current of approx. 250 μA on average

• Self-adaptation to changing environment

Note: Specifications are subject to change without notice

For all inquiries, you may contact us through Telephone, Email or Live Chat Support.

Operating Hours
Monday to Friday: 8.00am to 5.30pm

Technical Support (After Office Hour)
Tel: (65) 9876 6258

Contact Informations