FED Hypo – On-site Sodium Hypochlorite Generator

 

fed

Transporting bulk chlorine on crowded highways and into residential area has become a major safety concern. Federal and local authorities have recognized this problem and are dictating better solutions to this problem. More stringent regulation of toxic gases and accidental releases of chlorine have required industry professionals to seek alternative methods of disinfection.

On-site sodium hypochlorite generation has many advantages over conventional chlorine systems. The advantages include safety, reduced operational costs, consistent solution strength, and production on demand. On-site generation also eliminates OSHA process safety management training, risk management planning purchasing and transportation of HazMat Chemicals while reducing disinfection by-products. The most important benefit is improved water quality.

Electrolytic Cell Reaction
fed-hypo-reaction

On-site generation of hypochlorite has proven itself to be cost effective, reliable and safe alternative to stringent regulations and rising costs of chlorine gas and bulk sodium hypochlorite. On-site generation is the best solution to a major regulatory challenge facing all water and wastewater utilities.

  • Safer chlorine process
  • Reduced overall cost
  • OSHA and EPA exempt
  • Improved water quality
  • Reduced disinfection by-product formation
  • Improved process efficiency
  • Eliminate dependence on chemical suppliers
  • Reduced maintenance
  • Portable water
  • Odor control
  • Wastewater treatment
  • Swimming pools
  • Irrigation systems
  • Agriculture / farming
Model
FED H5
FED H10
FED H20
Rated FAC Capacity
(kg Cl2/ Hour) *
5
10
20
Water Treatment Capacity
(@ 2 ppm FAC)
2500 m³/hr
690 l/s
5000 m³/hr
1380 l/s
10000 m³/hr
2760 l/s
Water Treatment Capacity
(@ 3 ppm FAC)
1660 m³/hr
460 l/s
3320 m³/hr
920 l/s
6640 m³/hr
1840 l/s
Salt Conversion **
≈ 3.5 kg salt / kg FAC
Energy Conversion **
4.5 kW / kg FAC
FAC Concentration *
8000 mg/l (ppm) ± 1000 mg/l (ppm)
Generator Flow Rate (l/hr)
625
1250
2500
Type of Cells
Hypo 5
Hypo 10
Hypo 20
Electrical Power Requirement
3 Phase, 380 - 480V, 100A, 50-60 Hz
Feed Water Requirement
Deminerised/ Softened Water with Pressure > 2.5 Bar
Auto Acid Flushing
Yes
External Vent Makeup Air
600 m³/hr
Dimensions of Electrical &
Hydraulic Panel (WxDxH) in mm
4200X1250X1800
4200X1250X1800
4200X1600X2100

* Production may vary depending on salt and water quality
** Conversion efficiency may vary depending on salt and water quality

Note: Higher Capacity Available Upon Request



Share On Facebook
Share On Twitter
Share On Linkedin
Whatsapp
We Chat
Contact us

More Products / Systems