Newport Infinity C Series
NEWPORT INFINITY® "C" series feature the biggest brightest display of any 1/8 DIN panel meter. The user can select the display color: RED, AMBER, or GREEN
• Big Bright LED Display
• Scaling in Wide Range of Engineering Units
• Built-In Excitation
• Analog Output Optional
• Dual Relays Optional
• Tare Button
• Peak Memory
Panel Meters with Relays and Analog Output
The unparalled accuracy of the NEWPORT® Electronics INFINITY® signal conditioning is available in an economical series of Panel Meter/Controllers. The NEWPORT INFINITY® "C" series of meter/controllers feature a four digital display plus optional dual 5 amp Form C relays and a choice of isolated or non-isolated analog output. The scalable 0-10 Vdc, 0-20mA, or 4-20 mA analog output can be used as a retransmission of the display value or as a proportional control output as required. The microprocessor based INFINITY® "C" series includes instruments for Process (DC voltage and current) Strain Gage, Thermocouple, RTD, Dual/Differential Thermocouple, Dual/Differential RTD, pH, ORP.
The INFINITY® C process meter accepts a wide variety of DC voltage and current inputs to cover any typical process application. Standard features include easy front panel scaling to virtually any engineering units, selectable excitation of four voltages to work with most transducers and transmitters, front panel and remote tare function for weighing applications, and a hardware lockout to prevent unauthorized changes in setup. Four full digits and simplified scaling via the front-panel pushbuttons make it easy to set the display to read in any engineering units.
|
Technical Details
|
|
|
Input Ranges
|
0-100 mV, ±50 mV, 0-10 V, ±5 V, 0-20 mA, 4-20 mA
|
|
Isolation
|
Dielectric strength to 2500V transient per 3mm spacing based on EN 61010 for 260 Vrms or DC working voltage
|
|
NMR
|
60 dB
|
|
CMR
|
120 dB
|
|
Input Protection
|
Voltage Input = 120 Vrms max; Current Input = 100 mA max
|
|
Input Impedance
|
100 Meg ohms for 100 mV or ±50 mV input range; 1 Meg ohm for 10 V or ±5 V input range; 5 ohms for 20 mA current input range
|
|
Display
|
4-digit, LED 9-segment, 21 mm (0.83"), (Red, Green, Amber)
|
|
Analog-To-Gigital Technique
|
Dual slope
|
|
Internal Resolution
|
15 bits
|
|
Read Rate
|
3/sec
|
|
Polarity
|
Automatic
|
|
Max Error Process
|
±0.03% of reading, ± 1 count
|
|
Span Tempco
|
50 ppm/°C
|
|
Step Response
|
1 sec
|
|
Warm-up to Rated Accuracy
|
30 min
|
|
Load Regulation
|
1.1%
|
|
Line Regulation
|
0.02% per Vac
|
|
Analog Output (Optional)
|
0-10 V, 4-20 mA or 0-20 mA; may be assigned to a display range or to setpoint #1, when used as a proportional control output
|
|
Operating Temperature
|
0 to 50°C (32 to 122°F)
|
|
Storage Temperature
|
-40 to 85°C (-40 to 184°F)
|
|
Relative Humidity
|
90% at 40°C (104°F) (non-condensing)
|
|
Panel Cutout
|
1/8 DIN, 45 x 92 mm (1.78" x 3.62")
|
|
Weight
|
575 g (1.27 lb)
|
|
AC Power Unit
|
|
|
Power
|
115 Vac or 230 Vac ±10%; 50-60 Hz, 11.0 watts max.
|
|
Excitation
|
24 V @ 25 mA or 12 V @ 50 mA or 10 V @ 120 mA or 5 V @ 60 mA
|
|
DC Power Unit
|
|
|
Power
|
10-32 Vdc; 8.0 watts max.
|
|
Excitation
|
24 V @ 25 mA or 12 V, 10 V, 5 V @ 35 mA (For Low/Medium Brightness), For High Brightness use external excitation to power sensors
|
| Note: Specifications are subject to change without notice. | |
| Download Catalog | |
| Newport Infinity C Series |  |
 |
For all inquiries, you may contact us through Telephone, Email or Live Chat Support.
Operating Hours
Monday to Friday: 8.00am to 5.30pm
Technical Support (After Office Hour)
Tel: (65) 9876 6258
Contact Informations
| By Phone / Fax | By Email | By Live Chat | |
| Tel: (65) 6553 0366 Fax: (65) 6553 0828 |
This e-mail address is being protected from spambots. You need JavaScript enabled to view it |
|
|
|||||||||||||||||||||||||||
