Series Process Meter
Six full digits and broad scaling capabilities make the INFP meter ideal for demanding process control applications. Suited for even the most hostile environments with a gasketed front bezel, this meter offers on-board excitation to let you power virtually any sensor or transmitter
• 6 Digit Display
• Split Meter with Remote Display
• Four Isolated Open Collector Outputs
• Wide Selection of dc Voltage and Current Ranges
• High Accuracy of ±0.005% of Reading
• Large Digital Offset Capabilities Enabling Easy Scaling in Engineering Units
• Smart Filtering Detects the Difference Between a Spike or Process Change (Patent Applied For)
• Selectable Decimal Point and Read Rates of up to 13 Readings/Sec
• Peak and Valley Detection and Memory
• Configurable Via Front Pushbuttons or Via RS-232 or RS-485
• Isolated Dual 7 Amp Form C Relays
• Isolated Parallel BCD Output
• Isolated Analog Output of 0-10 Vdc, 0-5 Vdc, 1-5 Vdc, 0-20 mA dc and 4-20 mA dc
• Isolated Serial RS-232
• Isolated RS-485, Addressable up to 199 Units
Four standard setpoints give you the flexibility to control or alarm your system completely. The meter lets you scale and offset the input signal into any engineering units desired, plus select a two-point data method of scale and offset that eliminates the signal errors transmitted from a sensor.
You can capture and display both peak and valley levels of your input signals, an important feature for such applications as destructive and pressure testing. Five different kinds of excitation are available for sensors such as transmitters (24 Vdc @ 25 mA), strain gages (1.5 to 10 Vdc @ up to 60 mA max.), slide-wire potentiometers (1.25 Vdc @ 30 mA).
The meter is delivered configured for the input type you choose. The meter can be easily reconfigured using the front pushbuttons or via either of the optional serial communications boards. All options are field installable, so you easily upgrade as your needs change.
|
Technical Details
|
|
|
Accuracy
|
±0.005% rdg
|
|
Span Temperature Coefficient
|
±20 ppm
|
|
Step Response
|
1 sec to 99.9%
|
|
Warmup to Rated Accuracy
|
50 min
|
|
Operating Ambient
|
0 to 50°C (32 to 122°F), 95%RH, non-condensing
|
|
Storage Ambient
|
-40 to 85°C (-40 to 185°F)
|
|
Power
|
115 or 230 Vac, 49-400 Hz; 10 to 32 Vdc
|
|
Power Consumption
|
6 W nominal, 10 W max.
|
|
Normal Mode Rejection
|
60 dB
|
|
Common Mode Rejection
|
120 dB
|
|
Common Mode Voltage
|
1500 V peak per Hv test
|
|
Resolution
|
15-bit
|
|
Conversion
|
dual-slope technique
|
|
Reading Rate
|
3/sec or 13/sec, 60 Hz; 3/sec or 12/sec, 50 Hz
|
|
Display
|
red or green 6-digit, 14-segment, 13.7 mm (0.54"); 4 alarm indicators
|
|
Dimensions
|
48 H x 96 W x 165 D mm (1.89" x 3.78" x 6.5")
|
|
Panel Cutout
|
45 H x 92 W mm (1.772" x 3.622"); 1/8 DIN
|
|
Weight
|
574 g (1.27 lb)
|
|
TTL Outputs
|
four, isolated open collector; rated 150 mA at 1 V sink, 30 V open
|
|
Dual Relays
|
form C, 7 A at 30 Vdc or 230 Vac
|
|
BCD Output
|
isolated, tri-state, TTL/CMOS compatible; external 5 V supply for isolated; internal 5 V supply for non-isolated
|
|
Four Relay Option
|
dual 7A relays and dual 1 A relays
|
|
Analog Output
|
0-5 V/1-5 V/0-10 V/0-20 mA/4-20 mA, user selectable; 354 Vp isolation; 14-bit resolution; 0.1% accuracy, 50 msec step response
|
|
RS-232 Communications
|
300/600/1200/2400/4800/9600/19.2k baud; RJ11 4-wire connection; complete program setup and message display capability; programmable to transmit current display, alarm status, min/max, actual measured input value and status
|
|
RS-485 Communications
|
300/600/1200/2400/4800/9600/19.2k baud; RJ12 6-wire connection; addressable from 0 to 199
|
|
Voltage Input Ranges
|
0-100 mV, 0-1 V, 0-5 V, 1-5 V, 0-10 V, 0-100 V, ±50 mV, ±500 mV, ±5 V, ±50 V
|
|
Current Input Ranges
|
0-20 mA, 4-20 mA
|
|
Input Configuration
|
single-ended
|
|
Polarity
|
unipolar/bipolar, programmable
|
|
Span Adjustment
|
+0.00001 to 500,000, programmable
|
|
Offset Adjustment
|
0 to 999,999 or 0 to -99,999, programmable
|
|
Sensor Excitation
|
24 V at 25 mA for loop power
|
| Note: Specifications are subject to change without notice. | |
| Download Catalog | |
| Series Process Meter |  |
 |
For all inquiries, you may contact us through Telephone, Email or Live Chat Support.
Operating Hours
Monday to Friday: 8.00am to 5.30pm
Technical Support (After Office Hour)
Tel: (65) 9876 6258
Contact Informations
| By Phone / Fax | By Email | By Live Chat | |
| Tel: (65) 6553 0366 Fax: (65) 6553 0828 |
This e-mail address is being protected from spambots. You need JavaScript enabled to view it |
|
|
|||||||||||||||||||||||||||
