Turbidity Analyzer - TC Series / M100
Built in auto cleaning wiper with hard-to-scratch sapphire glass makes maintenance easy with reliable & stable measurement in harsh conditions.
Suspended solid transmitter uses a method of 90°C scattered light. In the method, a light source of a Detector illuminates the surfaces of suspended matter floating in the water and the light is scattered by these surfaces is detected by a photo element installed at an angle of 90° from the light source. The suspended solid is determined by the amount of scattered light.
• Build-in wiping cleaning system certainly keeps lenses clean
• Check and clean the window surface once every month.
• “Easy to Clean” scratch-proof sapphire glass for the optical windows
• Compact size can fit into any installation site
• Monitoring of clarifier overflow weirs in waste water treatment plants
• Final outlet of effluent from dissolved air floatation plants
• Raw water inlet measurements in water treatment plants
• Surface water monitoring
• Solids loading in rivers and streams
• Product breakthrough on plate heat exchangers
|
Technical Details
|
|
| Sensor TC Series | |
| Measuring Range |
0-100(FTU) / 0-500(FTU) / 0-3000(FTU)
|
| Output |
Analog (4-20mA) signal output:
resistance load of 300Ω (Max.) 4mA: 0 (mg/l) 20mA: 1000 (mg/l) Self-checking output: open collector (12VDC 20mA Max.) |
| Input |
Calibration signal input
|
| Cleaning System |
Both sided swing wiper cleaning system
|
| Operating Temperature |
0-40°C (unfrozen)
|
| Material |
SUS 316L, sapphire glass, fluorocarbon rubber, EPDM, POM
|
| Degree of Protection |
IP 68, maximum depth of 2 meters (underwater type)
|
| Detector Cable |
Length 10m
|
| Transmitter M100 | |
| Power |
110 - 240 VAC 50/60Hz
|
| Display Resolution |
0.1mg/l(0-49.9mg/1)
1mg/l(50-1000mg/l) |
| Output |
Calibration Output
Power Supply for Sensor (12 VDC) Signal Output (analog 4-20mA, resistance load of 300Ω or less) Self-checking Relay Output (240 VAC, 1A) Alarm Relay Output (240 VAC, 1A) |
| Input (Detector) |
Detector signal input (analog 4-20mA, input resistance approx.100)
Self-checking input |
| Operating Temperature |
-20°to +50°C
|
| Material |
Polycarbonate
|
| Protection |
IP65
|
| Note: Specification are subject to change without notice. | |
| Download Catalog | |
| Turbidity Transmitter |  |
 |
For all inquiries, you may contact us through Telephone, Email or Live Chat Support.
Operating Hours
Monday to Friday: 8.00am to 5.30pm
Technical Support (After Office Hour)
Tel: (65) 9876 6258
Contact Informations
| By Phone / Fax | By Email | By Live Chat | |
| Tel: (65) 6553 0366 Fax: (65) 6553 0828 |
This e-mail address is being protected from spambots. You need JavaScript enabled to view it |
|
|
|||||||||||||||||||||||||||
